SMOK H PRIV 2 KIT REVIEW

FIRST IMPRESSION OUT OF THE BOX

What’s up everybody? Deucesjack at VapingInsider.com. I got a new one for you today. Today I got the Smok H Priv 2 Kit. let’s not waste anytime. Let’s cut down low. I’m going to go ever the tank, the mod, the menu system then we’re going tot come back on top. We’ll do cons and pros and we’re out of here. See you down low.

WHAT’S IN THE BOX

  • 1 H-PRIV 2 225W Box Mod
  • 1 SMOK TFV12 Big Baby Prince Tank
  • 1 0.4ohm V8 Baby-Q4 Quadruple Coil
  • 1 0.15ohm V8 Baby-T12 Duodecuple Coil
  • 1 Spare Glass Tube
  • 1 MicroUSB Cable
  • Spare Parts & O-Rings
  • Instructional Manual

Smok H Priv 2 Kit Review

Alright everyone, welcome to the downlow portion of this video. Today we’re going over the Smok H Priv 2 Kit. here is the packaging you will receive it in. There’s little barcode there for an App. on the back, they got a little bit of scratch and sniff over there. On the back here, you’ll see that the kit includes 1 H Priv 2 mod, a TFV12 Big Baby Prince tank. Boy that’s a mouthful. You also get 1.4 ohm quadruple coil preinstalled. You also get .15 ohm Duodecuple coil. I guess that’s how you say it. I’m not sure. Seems like a big name for a little coil. You got a replacement glass, USB cable, user manual and spare parts.

Let’s open this bad boy up and see what we have here. Here we go. Top of the box comes off likeso. Look at that. That is one beautiful mod. Let’s put it to the side for a second. Let’s put out the foam insert. Of course underneath the foam insert, we have all the books and crap. Battery safety card, file that to the side, user manual, file that to the side, some tasty silica gel, get rid of that, and we have a warranty card with a QC verification. Get rid of that.

One thing I’m a little surprised at, normally with Smok mod, I get a black cable, this one almost looks like a Vaporesso cable. Really nice high quality one. I like it. Good job on that, Smok.

We got some spare parts here. Here are some spare O rings, some spare gaskets, some more O rings, here is your spare glass. Tnk comes preinstalled with a bubble glass but this is a straight glass.

Focus On www.ave40.com For More Vape Kits.   

FROM TOP TO BOTTOM

THE TANK

Now, let’s take a look at the tank. This is the TFV12 Big Baby tank. I hope I said that right. I think so. Nice drip tip. Kind of got that snakeskin honeycomb thing going on. They did a nice job on the drip tip. Typical Smok drip tip. 2 O rings on the side like that. It’s an 810 style drip tip. But you need the ones with the o rings on the outside not the ones where your o rings are on the inside. Nice deep juice cup there. Locking mechanism on top. Slider style, slide it open. There is your fill port right there. You get an extra gasket with it. I really like that locking mechanism right there. Clear markings as to where you open it there. You see the ‘Open’ right there. I don’t know if you could see that on camera because it’s dark.

Smok H Priv 2 Kit Review

On the bottom, we have bottom airflow. Nice smooth AFC tolerance. Stoppers on both sides, whatever you adjust on one side happens on the other. On the bottom of the tank we have some Smok branding. 510 pin, insulator ring around it. Looks like a stainless steel 510 pin, stainless steel threading around the edges. Very smooth, it sat on all my other tanks flush.

Smok H Priv 2 Kit Review

If you want to take it apart, you simply give the base a twist and you’ll see the coil comes out with the base. This is the .15 ohm coil, good for 50 to 90 watts. Best rating of 60 to 80. Nice big coil. Plenty of wire in there, plenty of cotton. Threading on the coil is very smooth. I had it in there pretty tight. There is the base right there. Smok always does a good job on their tanks. I know they get a lot of hate but they do do a good job on it. I apologize for using a juice up coil in this demonstration but when I first got this, I thought I was going to be doing a written review.

A you can see, this is the .4 ohm coil, good from 30 to 65 watts. Best from 50 to 60 watts and that’s just one coil in the middle there. Definitely a mellower vape than the other coil that I just showed you. Let’s put this all back together.

THE MOD

Drip tip in, let’s zoom out a little bit and let’s put it on the mod and let’s see what we have here. First thing you’re going to notice is, this has got like an anodized type of finish to it. It is an absolute fingerprint magnet but I really like the honeycomb that they did over here. I think it matches the drip tip well. You got some carbon fiber panels on the side here. Has a real anodized like look to it. More carbon fiber over here. A little bit of Smok branding. A little bit of H Priv 2 branding over here. This is your fire bar. Very very clicky. You can fire it down really low and it’ll still fire. Here is your USB update port. On the top is where your screen is. Before we install some batteries and get into the screen, let’s go over the 510 connections.

Smok H Priv 2 Kit Review

Spring loaded gold plated 510 connection. Has what I would call a medium throw with a medium spring. Threading around here is very nice. All my atomizers sit flush on it. Stainless steel plate over here. Going around to the other side of the mod, here is your battery door. You kind of have to slide it out and push it up. It is not spring loaded. You have clear battery indicator markings over here although I wish they were a different color. Gold plated button style contacts that label the batteries A and B. Inside, you can see, there’s also clear battery orientation markings. That gold piece down there is a spring loaded gold plated battery contact. We’re going to load some batteries in. positive side down, over here. Negative side down, over here. Shut it like that. You’ll se w have some venting over here as well. A little design by Smok over here, or Smoke, whatever you want to call it.

Smok H Priv 2 Kit Review

Batteries are installed. All you do, 1 2 3 4 5, 5 clicks on, you see the Smok screen. You see the version of the firmware. Here you see, I’m at 58 watts, normal preheat, there are my battery meters, resistance, voltage and that is my puff counter in seconds.

MENU SYSTEM

Now, in order to enter the menu system, 1 2 3, right now you’re in the mode. You can hold that down and now you can scroll with your left and right buttons between the different modes. You got Wattage, Titanium, Nickel 200, Stainless Steel and back to Wattage mode.

Let’s put it into Stainless Steel for now, hard press that. Once you pick your temperature, you can adjust your wattage in TC mode. Hard press to confirm. You can also adjust your TCR, hard press to confirm and now you can see we are in temperature control mode because there’s a little SS in the corner there.

You want to go back into Wattage mode, 1 2 3. Now you can scroll and go back to Wattage mode. Now, when you go to Wattage mode, it access you if you want Normal, Hard or Soft. I normally stay at Normal, hard press and that’s it. You’re in Wattage mode.

Smok H Priv 2 Kit Review

In order to access the other functions of this screen, 1 2 3, now you can adjust your puffs, hard press. You can do that. Hard press, reset puffs, No, Yes. now we reset the Puffs. 1 2 3, you can also go into your settings mode, hard press. You can go into Stealth. You can adjust the screen brightness, you can rotate the screen there and you can adjust your ohms there. And that’s your download menu and back to Stealth. We just hard press. Hard press, we’re out. 1 2 3, settings and this is where you can power it off. Hard press, hit one of the buttons, now you can power it off. Now it says goodbye. Now in order to turn it back on, of course again, 5 clicks. And now, if you want to lock the mod, you can give it 5 clicks and now the mod is locked. There you go.

That’s all I have for you folks on the down low. Let’s cut back on top. Let’s vape on it and then we’ll talk about the cons and pros of the Smok H Priv 2 Kit. See back on top.

GENERAL THOUGHTS

Alright. We’re back on top with the Smok H Priv 2 Kit. Man, you saw it down low. One gorgeous looking kit. They did a great job matching the tank to the mod. Looks fantastic. I’m really digging it. I’ve been rocking this thing for well over a month now. It’s held up really nice and you guys know that I’m real rough on my mods. Let’s not waste any more time. Let’s cut right into the cons and the pros.

Smok H Priv 2 Kit Review

CONS

First con is going to be that screen, man. That screen is super dim. Smok, what are you doing? Get rid of that dark screen cover. Bad job. It’s useless outside in direct sunlight, I don’t like it.

Next con is going to be, no material on the coils. Smok, you gotta stop with that. We need to know what we’re vaping. You need to imprint the material on the coils.

Other con is going to be, you guys got a decent TC device. It’s been doing ok TC, why didn’t you include a TC coil? Start using stainless steel coils, Smok. we’d like to see that.

Other con is going to be, it only charges at 1 amp. Yes, we recommend you charge externally all the time but for those times that you were in a pinch, we love having 2 amp charging. It’s standard. Smok, you need to make that standard on all your mods, 2 amp charging.

PROS

Let’s get in to the pros because there are a lot of them.

First pro is going to be the tank. That bubble glass 7 ml capacity. They’ll get a pro for that.

Second pro is going to be, the TC on this is actually decent. It’s better than past Smok mods. We’ll give them a pro for that.

Going to give them a pro for accuracy in power mode. I vape it next to my DNA and Yihi Chip and it seems to be hitting all the wattages. It seems to hit the full amount of wattage on this mod. I’m going to give them a pro on that.

Let’s give them a pro on nice flavor and cloud production. They’ll get a pro for that.

Paint quality. I’m going to give them a pro for that. Paint quality on this thing, this anodized look, simply awesome. Great job on that Smok.

I’m going to give them a pro on the looks. Look at this thing, man. It’s a good looking kit. There’s no doubt about it. It’s a looker.

Smok H Priv 2 Kit Review

Let’s give them a pro on the form factor. It’s got a very comfortable form factor and very easy to fire. Love that firing bar. We’ll give them a pro on the firing bar as well and the fact that it’s comfortable to fire.

Let’s give them a pro on firmware upgradeable. That always gets a pro on this channel.

The last pro I’m going to give them is, they did a great job on the battery door. It’s nice and tight. It doesn’t snap open when I put it down. Great job on that, Smok.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :SMOK X-Priv 225W TC Kit with TFV12 Prince

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

SMOK T-Priv Kit | A Rugged Box

We review the T-Priv kit, from SMOK. This eye-catching mod combines the edges of Wildstyle, angles of Decepticon, and spits them out with a lightshow to boot.

  
SMOK_T-Priv_Kit

Focus On www.ave40.com For More Vape Kits.  

Chinese vape manufacturer SMOK is well known for their imaginative design, and product backstories that are literally out of this world. Their latest offering is the highly anticipated T-Priv, available as a stand-alone mod, or paired with the TFV8 Big Baby tank as a starter kit.

The T-Priv combines a form factor reminiscent of the H-Priv with an aggressive future aesthetic. The outer shell of the mod is a hollowed-out chassis with deeply engraved detailing. Under that layer sits the LED panels – fully customizable – that illuminate when you vape and fire the device.

The specs sheet looks very similar to other recent SMOK offerings: dual 18650 batteries, wattage up to 220 W, TC mode for nickel, stainless and titanium, and firmware upgradable. A quick search online finds the T-Priv selling as a stand-alone from $50 up to $72, and as a starter kit from as low as $57 in some China shops.

Let’s take the T-Priv for a vapetest and see how it performs!

Disclaimer: We received the T-Priv kit from SMOK for the purpose of this review.

SMOK T-Priv Kit Specs and Features

Unboxing

SMOK_T-Priv_Kit

The T-Priv kit ships in the now-standard packaging we have come to expect from SMOK. You get the TFV8 Big Baby tank and two coils, the V8 Baby Q2 and T8, to start you off. The usual spares come with the kit too – o-rings, a spare juice inlet, vape band, and spare tank glass. The T-Priv ships with the 2 mL version of the TFV8 tank in the EU. The user manual is comprehensive, and covers the feature range of the kit.

The only extras you’ll need are some 18650 batteries, and that all-important e-liquid to vape on.

The T-Priv is available as a stand-alone mod, or paired with the TFV8 Big Baby tank. This is a reliable, if somewhat thirsty, sub ohm tank that comes as standard with a range of SMOK products these days. For the rest of this review, we will deal primarily with the T-Priv mod itself. For my thoughts on the Big Baby tank, check my review of the GX2/4 kit, as well as Bill Herbst’s review of the Baby Beast tank.

Build quality

SMOK_T-Priv_Kit

The T-Priv is one solid mod that makes a beastly first impression. There’s no button rattle to speak of. The firing bar has a similar soft, short throw to the recent GX2/4 mod.

The OLED display is situated on the top side of the mod, similar to the G320 and the H-Priv. Although the glass covering the display takes up half the space up top, the display itself is a fraction smaller than we’ve seen on previous SMOK offerings. I measure it is 18 mm from corner to corner, or 0.7 inches. This cramps the menu some in comparison to other SMOK mods. Everything is perfectly legible, but the displays on the G320 and GX2/4 are brighter. The screen sits on a raised bevel a couple of millimeters higher than the rest of the mod. You’ll be able to fit an atomizer or tank up to 25 mm on it without overhang, or interfering with that raised edge. The positive 510 pin is gold-plated and spring-mounted. I’m yet to encounter any connectivity problems with third party atomizers.

Of course, it’s the T-Priv’s deeply engraved outer shell that steals the show here. Sitting somewhere between some 80s wildstyle graffiti and a vengeful Decepticon, the exterior is all aggressive, hard angles and dynamic edges. At present, the T-Priv comes in seven color options, with a further seven on pre-sale. The paint on the mod has a metallic sheen to it, similar to the GX2/4. Our red sample looks great. The “rainbow”, or 7-color, less so. If you’re after a true anodized effect, look elsewhere. As with their OSUB 80W mod, the colors look airbrushed on. But perhaps it’s that auto detailing that has inspired the pre-sale run of new colors.

Sitting beneath that is a layer of white plastic which is lit up by nine LEDs. This lights up while you’re firing the mod. You can change the colors, transition effect, and exactly when they glow in the settings menu.

The battery door is easy to open and close. The battery contacts are gold-plated for conductivity. Both the door flap and the inner terminals are clearly marked with their respective positive and negative positions so you know how to insert your batteries. Although it’s not mentioned on the spec sheet, you can charge the T-Priv via the USB port. The T-Priv offers just under 1 amp internal charging. This offers vapers on the road extra flexibility. However, I would advise to always use an external charger.

For a lot more information on the technical performance of the T-Priv, be sure to check out Daniel DJLSB Vapes’ comprehensive breakdown of the device.

SMOK_T-Priv_Kit

If you’ve seen one SMOK menu interface, then most of the features on the T-Priv will be familiar to you. SMOK offers users a comprehensive range of options that will be more than enough to satisfy someone looking for a decent box mod starter kit.

  • Turn on the T-Priv with 5 clicks to the fire button. Once it’s on, 5 clicks will lock (and conversely unlock) the device.
  • Three clicks of the firing button take you to the menu. You can then choose from Mode, Puff, Color, Setting, and Power submenus.
  • Mode: switch between VW and TC modes.
  • Under wattage, you can choose from three strength settings – soft, normal, and hard.
  • Under temperature, you first dial in the desired wattage, then select from Ni, Ti, and SS wire types. Finally, you can manually adjust the temperature coefficient resistance of each metal. If you’re unsure about this, it’s best to stick with the default values (the TCR default for SS is 0.00105, suggesting SS304 wire type), but if you want to tweak settings, have a look at Steam Engine’s Wire Wizard calculator, the go-to resource.
  • Puff: count how many times you’ve inhaled, adjust puff settings, as well as a limiter and reset function.
  • Color: select your favorite LED color, whether the colors jump or fade, and choose whether the LED colors are always on, just when you vape on the device, only when the screen is activated, or not at all.
  • Setting: toggle stealth mode and screen timeout (doesn’t turn off the LED panels – only the OLED display), change the screen contrast, rotate the screen orientation 180°, adjust ohm resistance manually, and make firmware updates.
  • Power: turn the T-Priv off.
  • You can also turn the T-Priv off when the screen is locked by long pressing the fire button for 5 seconds.
  • To quickly switch between VW and TC mode, hold down fire and down simultaneously.
  • You can change your draw strength in VW mode, and wattage in TC mode, by pressing fire and up simultaneously.

The OLED screen display is noticeably smaller than on recent offerings such as the G320, Q-Box, or GX2/4. However, the loss of OLED real estate has been compensated by paring down and simplifying what you see on screen.

Wattage can be adjusted in .1 increments from 6 – 100 watts, and 1 watt increments thereafter. In TC mode, you can cycle between Fahrenheit (moves in 10° steps) and Celsius (5° steps). To switch from one to the other, simply cycle up to the top or bottom of either range, and the temperature type will swap over.

Set up

SMOK_T-Priv_Kit

I used the T-Priv with a variety of atomizers and tanks for this review, including the TFV8 Big Baby tank, the Ammit 25 RTA, and the Nova RDA from BMI. I typically used 70/30 VG/PG blends and like to vape between 65 – 80 watts.

How it performs

SMOK_T-Priv_Kit

The T-Priv has a very short ramp-up time and felt accurate, for the wattage range I used it with. It’s a sturdy mod that won’t fit every hand comfortably, and feels like it needs to be paired with a suitably imposing tank or atty to really finish off that killer impression the body makes. If you want to go whole-hog you could pair it with the TFV12 (like Austin Lawrence did the other day). That feels like a better match, proportionally, than the TFV8 Big Baby tank.

The firing button is easy to reach and quite responsive. I prefer a clickier button, but this firing bar is a lot more satisfying than the smaller wedge on the GX2/4 at least.

The effect of the LED lights will be lost on most any vaper who uses the T-Priv during the day. It’s somewhat ironic that you can’t see the lightshow you’re creating. Even in a pitch-black room the effect is blocked by the hand that covers half the mod when it’s being fired.

But for what it is, the T-Priv performs in much the same way as other SMOK products. Meaning: it does what it’s supposed to do. One reservation I have is that getting lit with the T-Priv will drain battery life.

Ergonomics and form

SMOK_T-Priv_Kit

The T-Priv will draw heads and split opinion. But it follows SMOK’s logic of creating eye-catching, interstellar inspired devices to the next level. Simply put, I’ve never seen a mass-market box mod quite like it before.

While aesthetics is totally subjective, form is always form. This isn’t a mod for the easily intimidated, or small of hand. It’s chunky, it’s large, and it’s a bit of a brick in the hand. Firing with the thumb or forefinger works whether you’re left or right handed, so that’s cool.

I understand why you’d position the screen up top, but it limits the size of the atomizer you could fit, which is a shame for such a chunky mod. If you’re using an RTA, or if your sub ohm tank leaks, chances are that e-juice will get on the OLED display.

Long-term, the crevices between the outer shell and the LED panels will collect grime and gunk, and I can imagine the T-Priv being tricky to clean.

Ultimately, the problem with “innovative” is that it dates quickly. The T-Priv may be a standout device right now, but in a year’s time? Will you still be rocking it?

Likes

  • Looks like Wildstyle had a lovechild with Decepticon
  • It’s got LED panels and they light up
  • Menu interface is easy to navigate and offers decent functionality
  • Comes paired with the TFV8 Big Baby tank
  • Big responsive firing bar

Dislikes

  • LED panels will drain battery life
  • Only fits 25 mm attys in spite of general chunkiness
  • OLED display will get spills on it easily
  • Body could be a pain to clean – crevices collect grime
  • Brick form factor

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available :Smok T-Priv 3 Kit with TFV12 Prince Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

 

Uwell ironFist Kit Review – First Vape Mod But A Good Effort?

Introduction: Uwell IronFirst Kit

The Uwell Ironfist is the first mod from a company that is best known for its tanks, specifically for the original Crown tank that put sub ohming on the map for its great flavour, big capacity and its stylish looks (for the time).

Sub Ohm tanks have advanced a lot since then and this kit comes with the new Crown 3 tank  which hopefully is as good or better then its predecessors. The bigger question however is how good is the mod? This is because the IronFist is Uwells first and currently only mod. Ive put both the mod and the tank through its paces and this is what I found.

Focus On www.urvapin.com For More Vape Start Kit.

In The Box

  • 1 x Ironfist Mod
  • 1 x Crown III Atomizer
  • 1 x Extra Quartz Glass
  • 1 x 0.25Ω Coil (pre-installed)
  • 1 x 0.4Ω Coil
  • 1 x Pack of Replacement O-rings
  • 1 x Micro USB Cable
  • 1 x User’s Manual
  • 1 x Crown Key
  • 1 x Drip Tip Cover (to cover the drip tip when it is not used).

Features

  • Tank Size: 24.5mm(d) x 62.7mm(h)
  • Mod Size: 56.5mm x 28.4mm x 86.5mm
  • Mod Material: Zinc alloy&leather
  • Power Range: 5W-200W
  • Standby Current: <50μA
  • Voltage Range: 0.7V-8.2V.
  • Resistance Range: 0.1Ω-3.0Ω(VW)/0.1Ω-1.0Ω(TC)
  • Temperature Range: 200°F-600°F/100°C-315°C
  • Color: Black, Lemon Yellow, Purple, Green, White, Sapphire Blue, Orange, Red

Design and Build Quality

Crown 3 Tank

Uwell has been in the vaping game awhile and has made some outstanding products. This kit is no exception. Starting with the tank, it has kept the Crown look we come to expect but with subtle improvements.

Every tread and every o-ring on the tank is perfect and works how you would hope. One of the slight changes from the V1 and V2 is the way you install the coils. All the previous coils have been screwed in to the base of the tank where the new coil is pressure fitted.

This way I believe is better for 2 reasons, firstly it is quicker to install and less likely to leak in my experiences. The second benefit is you can change the coil without needing to empty the tank which is a feature missing from many popular tanks on the market today.

The only design flaw I had with the tank comes with the green / rainbow model where the tank doesn’t really match the mod like the other options and the drip tip doesn’t match the tank.

Uwell IronFist Mod

The Uwell IronFist mod build quality is impressive and its easy to forget that this is their first ever mod. The paint finish is very high quality matt and it has real leather for the grip which you don’t see often from china. The device I’ve been sent has no button rattle, no paint defects and the leather is fixed with no signs of possible peeling in the future.

The design is very ergonomic and sits comfortably in both the left and right hand. Its a similar design to the G320 by Smok however this is slightly smaller as it holds 2 x 18650 batteries where the G320 holds 3.

The Uwell IronFist also has a unique design choice I haven’t seen on many vape mods, it has a switch where you can turn off the mod and consume no power. The only small design flaw with this mod is with the battery door, it doesn’t rattle or come off too easy but it could do with being a little tighter.

How Does the Uwell IronFist kit Perform?

Uwell Crown 3

When the original Crown tank came out it was a major hit as it delivered great flavour and big clouds (for the time). The Crown II was a bit of a flop, the coils burnt up very quickly and had little flavour, this shook a few people’s confidence in the company and a lot of people have been weary about the III.

I can safely say this tank is incredible, the flavour is some of the best I have ever had from any sub ohm tank. This along with great big clouds and smooth airflow makes for one fantastic atomizer.

You can also be reassured that it wont leak, with all my tests with both coils it comes with there was no signs of eliquid leaking and this should be the norm but it is surprising how many popular tanks leak.

Focus On www.urvapin.com For More Vape Start Kit.

Uwell Ironfist Mod

Firstly the menu is very easy to use, a simple 3 clicks of the fire button and your in the menu to select from power, temperature control for Ni, Ti, SS, they also have mech mode which is effectively bypass mode.

You can also flip the screen, lock the device and factory reset the mod. An important point for all vaping devices is how it fits in the hand, this mods design is extremely ergonomic and yes its not the smallest or the lightest but it does feel very natural in the hand.

The easy functionality with detailed display is a pleasure to use and the dual 18650 batteries is enough to last the whole day.

Pros

  • Large capacity tank
  • Ergonomic mod
  • Great looking set up (if you dont go green)
  • Very easy to use
  • Wattage adjusts in 1 point increments + Battery life %
  • Very good build quality

Cons

  • The green kit doesn’t match
  • Max tank size with no overhang on the mod is 25mm
  • On the heavy side of things
  • Not the smallest set up

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available :UWELL Ironfist 200W Kit with Crown 3 Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

 

FLOWERMATE AURA REVIEW

In succession to the V5.0, Flowermate created the Flowermate AURA. A compact, simple and affordable pen vaporizer. This digital vaporizer works with herbs, wax and oil. In this review we’ll take a closer look at this new product by Chinese manufacturer Smiss.

The box contains

1 Vaporizer

1 Mouthpiece

1 Liquid/Waxy Chamber

1 Medium Stainless Steel Pod

5 Stainless Steel Screens

1 Packing Tool and Dabber

1 Cleaning Brush

1 USB Charging Cable

1 User Manual

Focus On www.urvapin.com For More Vape Start Kit.

Design

The Flowermate AURA is a pen vaporizer that looks solid and robust. The casing is made out of hard plastic, and has a removable mouthpiece. The version that I’m using in this review is black with red tones. This vaporizer is also available in white or red.

The vaporizer has a small, built in OLED screen, that tells you how full your battery is, what the set temperature is, and whether it has already reached this temperature. Above the screen, you can find the power button and two smaller buttons that enable you to set the desired temperature. A USB port, for charging the battery, is located at the bottom.

This vaporizer looks simple, but is still very stylish. However, I found one disadvantage in the design. It is too big, and doesn’t have the right shape to fit in your pocket. Fortunately, it did fit in my purse (however I wouldn’t recommend to do that as it could accidentally switch on and get very hot).

Ease of use

The Flowermate AURA is quick and easy to use. To turn on the Flowermate AURA, you press the power button five times. Then you can set the temperature, using the two smaller buttons. The LCD screen displays the target temperature, and the current temperature as it is heating up. After you’ve set the temperature, the vaporizer immediately starts to heat up.

Subsequently, you can enjoy your vape, hands free, for five minutes, After that, it automatically switches off. As soon as it’s switched off, you’ll have to wait until the vaporizer has cooled all the way down, before it can be used again. I think this is a big disadvantage as you’re not in control of the duration of your vape session. Personally, I find this quite frustrating at times. I think it has to cool down so often to prevent overheating. The product can reach very high temperatures. The vaporizer itself, however (especially the mouthpiece) can get incredibly hot. This can be somewhat uncomfortable when you vape at a high temperature.

Loading the heating chamber is easy. You can access the heating chamber, simply by removing the mouthpiece. Put one of the (included) screens at the bottom of the compartment, put your herbs in there (when you use the vaporizer for wax or oils, use one of the included pods), pack them with the packing tool, and put the mouthpiece back in place. It’s really as simple as that. If you don’t use a pod, you should bear in mind that the screens can move quite easily. If you keep the vaporizer upright, you can prevent the screens from moving out of place.

The FlowerMate AURA is easy to clean and maintain. The only maintenance it requires is to replace the screens every now and then. The leftover herbs can be removed from the heating chamber by using the included brush. The vaporizer comes with two metal pods. One of them can be used for oil and wax and the other one can be used for pre loading, which is very handy if you want to vape outside of your house. Unfortunately it’s not so easy to clean the wax / oil pod. It contains a lot of very small, fiddly parts which the wax can get stuck to. Soaking in iso-alcohol or a similar cleaning agent is the preferred method to completely clean these pods.

Vapor and taste

The FlowerMate Aura features an isolated air path. Therefore it produces nice, pure vapor. The amount of vapor that comes out isn’t very high. However, the smell and flavour is good and concentrated.

The mouthpiece is also made out of plastic and it can get very hot when the vaporizer reaches a high temperature. This can cause the vapor to taste slightly plastic-like. When you’re taking the first few hits, you will definitely not notice this. But unfortunately, as soon as most of the plant material is evaporated, you will really start to taste the plastic. This is arguably the biggest downside of the AURA, and something that does not occur with other FlowerMate models, as those come with a glass mouthpiece.

When vaporizing at a high temperature, the vapor can get very hot. This can be harsh on your throat, and it can cause a dry throat and coughing.

Efficiency

It’s easy to regulate the temperature of this vaporizer. The FlowerMate AURA heats up really fast (although it works slower when the battery isn’t fully charged). It has a very wide and variable temperature range; it can heat up to 230 Celsius / 446 Fahrenheit.

One of the biggest plusses to this product, is that it’s totally combustion free. Even at the highest temperature. The vapor gets very hot, but you will never taste burnt herbs. When you remove the leftovers of the plant material, you will see that it’s dry and dark brown, but not burnt.

Durability

The casing of this vaporizer is thick and strong, with a solid plastic cover that shields the mechanisms inside. All in all, it’s a very solid and durable vaporizer. Also, it comes with a one year warranty.

The battery is built in, so it’s not replaceable. Still, the battery performs really well. It’s easy to charge by using the USB cable to connect it to your computer or USB wall plug. After three hours of charging, you can use it for two hours. This is exceptionally long and makes this vaporizer great for use on the go.

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available :Authentic Flowermate AURA Vaporizer

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

smok novo

dovpo topside

voopoo vfl

voopoo vfl pod

joyetech ultex

vladdin under kit

smoant naboo

vaporise drizzle

 

 

Wild Wolves: Wildwolf TC Box Mod from Hcigar

Company Hcigar has released the device Wildwolf. The boxmode received a maximum power of 235 watts, an XT235 board and powered by two 18650 batteries.

Focus On www.ave40.com For More Vape Devices

On April 25, Hcigar presented on its website the device Wildwolf. Boxmod performed in a laconic style with rounded corners. The case was made of zinc alloy and plastic. The landing pad with a diameter of 30 mm was supplemented with a decorative ring. On the front side there was a fire button, a color display, three adjustment buttons and a USB port from the bottom. At the bottom, the flip cover of the battery compartment was installed.

The XT235 board accelerates the device to 235 watts. In addition, it supports varivolt, thermal control and curve mode. Power is provided by two 18650 batteries. The color interface provides for each battery a separate charge indicator.

The package includes a decorative ring, a USB cable, a silicone case and instructions.

Main characteristics:

  • Size – 85 by 45 by 30 mm
  • Weight – 100 gr
  • Power – 5 to 235 watts
  • Thermal control – 100 ℃ -300 ℃ / 200 ℉ -600 ℉
  • Food – 2х18650

Now It’s Available :Hcigar Aurora Squonk Mod

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

Lost Vape Triade DNA250 Review

Lost Vape Triade DNA250 Review

Lost Vape has released a ton of great products in 2016. Even back when they first released their original DNA40 devices, they were of high quality and certainly impressed many vapers. When they first released the original Triade DNA200, it was a huge success. Now with the Evolv DNA250 board available, it was only a matter of time before they implemented it into the Triade, and releasing it to the market.

Focus On www.ave40.com For More Vape Devices

 

Out of the box

When I received the Lost Vape Triade DNA250, what I noticed first was the unique packaging. The packaging of Lost Vape products are always top notch, and this one is no different. This device came in an elegant packaging, and honestly this is the type of packaging you would expect with a much more expensive device. The packaging itself does say Triade, and has a magnetic tab where you can easily open it.

Upon opening the packaging, you are greeted with the Triade DNA250. My first impression of this device was that it’s certainly good looking. I could smell the genuine leather when first opening it as well. Included in the packaging, you also receive a micro USB cable which can be used for charging and firmware upgrading, a warranty card and a user manual.

When first holding the Lost Vape Triade DNA250, it felt great in the hands right away. This box mod is definitely ergonomic, which is a huge pro. The leather was nice and smooth. In my opinion, it’s a huge pro that this device features genuine leather rather than fake leather. It certainly gives this box mod some class.

Lost Vape Triade DNA250 Review

Honestly, the overall quality of this device is fantastic, and was certainly impressed by it. It did have some weight to it without three 18650 batteries installed, but it was on the lighter side.

The design of this device in comparison to the original is relatively the same. I didn’t have the original to compare to, but from what I’ve seen the design is basically the same. However, the major difference was the battery compartment. Since the DNA250 has additional safety features, the battery protectors from the Triade DNA200 is not needed in this version, which means getting your batteries in and out is much easier. I know some vapers who complained about this specifically with the Triade DNA200, so with this new version, there’s no worries in regards to this.

I do want to mention that there is zero button rattle with this device. This is a pro in my book, as I know many vapers who tend to get annoyed by button rattle. Plus, this shows the great quality of this device. Also, the buttons are nice and clicky.

All in all, my first impressions of the Lost Vape Triade DNA250 were positive. The fit and finish of this box mod is amazing, and it felt great to hold right away.

 

Usage

This box mod does require 3 high drain 18650 batteries, and I do recommend that you use 3 batteries that are married. If you’re unfamiliar with battery safety, definitely check out our battery safety article here. As mentioned previously, it’s really easy to get batteries in and out of this device. To install your batteries, you can utilize the spring loaded contact, and the same can be said when taking your batteries out. The batteries do stay in place securely, and I never had an issue with my battery wrappings being ripped or damaged.

When adding 3 high drain 18650 batteries, it added a substantial amount of weight to the Lost Vape Triade DNA250. This is to be expected of course, since it is 3 batteries rather than 1 or 2. Even though it was heavier, it gave it the feeling of having something valuable in your hands. Honestly, I got used to the added weight rather quickly, and actually liked the extra weight with the batteries. Something worth mentioning is that you might have a hard time opening the battery door itself, especially if you’re nails are cut short. The battery door is firmly in place which is a good thing, but in order to get it off, you do need to insert your nail into the side tabs. Not the biggest con, but still have to be mentioned.

As mentioned previously, the Triade does feature an ergonomic design, and it really is comfortable to use and hold over a period of time. The ergonomic design mixed with its excellent build quality gave this device a great feeling in the hands. Also, you can easily access the firing button with either your pointer finger or thumb, either way it was comfortable to use.

Also, carrying this device around with me in my pocket was perfectly fine. Typically, I do carry dual 18650 box mods with me when I’m out and about. The Triade DNA250 is a bit bigger than most other dual 18650 box mods, and it is a bit heavier, but I didn’t mind the extra weight nor the bulkiness in my pocket. Also, for the ladies, I do think this device would fit well in larger purses, but nothing small since it is a bit on the bigger side.

Even after using this device after some time, the leather battery door has held up quite well. However, I’m not too sure with how it will hold up over an extensive amount of time. I will come back and report if there were any issues with the leather, but so far it has been great.

Lost Vape Triade DNA250 Review

I do want to mention that the battery life was great with this box mod. With three high drain 18650 batteries, it is to be expected. However, depending on the wattage you prefer to vape at, it will determine the battery life. Even when vaping at 100w, I can get through almost the entire day with no issues. When vaping at lower wattages, say 50w to 60w, I can easily get almost two full days of vaping, which is certainly impressive.

All of my atomizers screwed down and made a connection. Also, even atomizers with protruding 510 pins were flush, which is a huge pro in my opinion. 30mm atomizers do look pretty good, but it does hang over slightly, but since the 510 connection is in the middle of this device, it does not overhang over the mod itself, as you can see in the picture shown in this section. The 510 connection fits up to 25mm atomizers with no issues. Smaller 22mm atomizers may not look the greatest since this device is larger.

Overall, my experiences using the Lost Vape Triade DNA250 was great. The battery life was excellent, and it was very comfortable to hold and use over time.

Focus On www.ave40.com For More Vape Devices

 

Performance

This device is powered by the Evolv DNA250 board, so you know with three high drain 18650 batteries you’ll be getting an accurate 250w. I personally do not vape that high of a wattage, so I did not test it all the way up to 250w. Honestly, I think this is more than enough power for most vapers.

If you’ve read some of our previous reviews, you can tell we’re huge fans of the Evolv DNA250 board. It has excellent temperature control, and it just vapes great. The power delivery is instant, and the fact that you can customize your device using the EScribe software is a huge pro.

With the Lost Vape Triade DNA250, you do get some presets already done for you, which are Watts, Nickel 200, SS 316, Titanium, SS 304, No preheat Nickel 200, Relaxed Nickel 200, and Hot Nickel 200. I do wish they implemented a few more for SS 316, because that’s a preferred wire for many vapers. However, it’s still a huge pro that they already set up a few profiles for you, so if you didn’t want to go into the EScribe software to set anything up, they’ve got you covered!

The Evolv DNA250 board is great for vapers who love to tinker, and customize their devices. You can add custom logos, add your own custom wire profiles, adjust the battery settings to the specific batteries you are using and much more.

Lost Vape Triade DNA250 Review

I did test this device all the way up to 200w, which is quite high as I’m a vaper who vapes primarily under 100w. The power was surely there, and my coils ramped up quickly with no issues. If you’re used to the Evolv DNA200 or DNA250 board, the performance of this device is exactly what you’d expect it to be, which is fantastic.

The temperature control works flawlessly as well. I only tested SS 316L, as I do not vape Ni200 or Ti wire anymore. I do want to mention that I did test SS 316L Clapton coils, and they worked perfectly as well with this device in temperature control mode. If you’re a fan of temperature control, a device with the Evolv DNA250 board is certainly up your alley, as it provides you with one of the most smoothest temperature control vape experiences on the market today.

All in all, the performance of the Lost Vape Triade DNA250 is excellent. The Evolv DNA250 board is one of the best on the market in my opinion, and vapers will not be disappointed with this device in regards to performance.

 

Pros

  • Solid build quality
  • Unique packaging
  • Comfortable to hold and use
  • Great battery life
  • Powered by Evolv DNA250 Board
  • Can be customized using EScribe Software
  • Firmware Upgradeable
  • Genuine Leather Battery Door
  • Excellent temperature control vape experience
  • Can accommodate up to 25mm atomizers with no overhang

Cons

  • 30mm atomizers do slightly overhang from the 510 connection area
  • Smaller 22mm atomizers may not look the greatest
  • Not sure how the leather will hold up over an extensive amount of time
  • A bit heavy with three 18650 batteries (Subjective)
  • May have a hard time taking off the battery door if you don’t have nails

 

Conclusion

In conclusion, the Lost Vape Triade DNA250 is a solid performing triple 18650 box mod, and has quickly become one of my favorite devices to use. I get excellent battery life, especially when vaping at lower wattages, and even when vaping at higher wattages, I get through at least most of the day.

Honestly, I didn’t really find any cons to this device, and most of the cons I had to really search for. Like mentioned previously, the leather has held up just fine with using it over time, but that can of course change. Also, 30mm atomizers do look pretty good on this device in my opinion, and the other con mentioned is subjective.

Lost Vape really did a good job on this device, and if you’re a fan of the original, then you’ll love this new version. The overall fit and finish of the Triade DNA250 is fantastic, and I was certainly impressed when I first opened the packaging.

All in all, if you’re looking for a new triple 18650 box mod, I can easily recommend the Lost Vape Triade DNA250!

I hope you find this review helpful in finding the right device to fit all of your vaping needs! Feel free to leave any questions or comments down below! Thanks for reading!

Now It’s Available :Lostvape Triade DNA250C Mod

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

KangerTech Xlum Kit Preview – Disco Mod

The Xlum Kit By KangerTech Previewed

Wow look at this sparkly beast! Meet the KangerTech Xlum kit!xlum banner

So the mod is the Xlum mod – and I think the “Lum” in Xlum stands for Luminous.xlum lighting

On the bottom of the front of the mod is the triangular style LED area. Apparently KangerTech call these “horse race lamps” as they are dynamic and the light moves around. See the little video below.

Focus On www.urvapin.com For More Vape Start Kit.

You will need 2×18650 batteries which are not included and the mod will output up to 200W.kanger xlum batteries

The display is an OLED TFT colour display with a round adjustment button below allows you to make adjustments and select from the various power modes. The fire button is mounted on the side of the mod.xlum screen

The kit tank is the Xlum tank.

xlum tankThe tank has a new NR mesh coil head which is 0.18ohm and best at 40-60W.xlum mesh coil

There are also 2 other coil heads the NR8-OCC which is also included in the kit or the NR2-OCC which is 0.4ohm and can be purchased separately.xlum coil range

A top fill and bottom adjustable airflow complete the features of the tank.xlum tank components

There are 5 colours to choose from – Space Grey, Blue, Red, Rainbow and Silver Black.xlum kit colours

Kit Includes

  • KangerTech Xlum Mod
  • KangerTech Xlum tank
  • 1xR8-OCC NiCr 0.2ohm coil
  • 1xNR Mesh 0.18ohm coil
  • Spare glass
  • USB cable
  • User manual
  • Spare parts

xlum kit contents

KangerTech Xlum Mod Specs

  • Power range: 10-200W
  • Output voltage: 0-8V
  • Size: 86x30x48mm
  • Battery: 2×18650 (not included)
  • Resistance Range: 0.05-3ohm
  • Temperature range: 200-600°F / 100-315°C
  • Modes: VW/TC-Ni, TC-Ti, TC-SS
  • Colourful moving light display

xlum mod specs

KangerTech Xlum Tank Specs

  • Capacity: 4.5ml
  • Size: 28x39mm
  • Mesh coil head
  • Top filling

Kangertech Spider 200W Kit Review – 3in1 Sub-Ohm Tank with Innovative Chip inside!

The Kangertech Spider Kit with a Five 6 Mini Sub-Ohm Tank with the all-new feature of having a Chip inside with a 3 in 1 Coil (3 different resistance), which is recommended for beginners and intermediate users. Kangertech is the first company to introduce this new feature. The Spider Box Mod is a very powerful device with a maximum of 200 watts output.

Background: Kangertech Spider Kit

I can consider the Kangertech Company as one of the pioneer manufacturers to produce different kinds of Vaping Devices for several years until now. I am able to use their product before which is the Subox Tank that produces a very flavorful vapor. For me, this is the first ever Tank that changes the game in the vaping community in terms of producing good flavors from your E-Liquids.

And now, they are introducing The all-new Kangertech Spider Kit  with innovative features that you will first experience in their product, The Kangertech Spider Box Mod has a new design feature for Up/Down settings which is the Rolling Scroll. Included in this Kit is The Five 6 Mini Tank which has an innovative Chip inside (another first for Kangertech).

Kangertech Spider Kit Review Background

Whats in the Box?

What will you get on a Kangertech Spider Kit?

  • Spider Box Mod
  • Five 6 Mini Tank
    • 2x Tiger Coil (with 3 different coils and ohms inside)
  • Spare Glass
  • USB Cable
  • User Manual
Kangertech Spider Kit Review Package

Key Features of the Kangertech Spider Kit

Spider Box Mod

  • Roller Switch – A new design feature for Up/Down button to adjust your wattage settings.
  • Charging Lights – With this new feature you can now monitor your battery life within your Mod without looking into the display screen.
  • Large Firing Button – Ergonomic Firing Button which is comfortable and easy enough to use.
  • 4200 mAh Battery – Big capacity for a battery life of a Vaping Box Mod

Five 6 Mini Tank

  • Chip Inside – The most interesting feature that this Kit has. There are 3 different coils inside with different resistance, a chip inside to switch from this different resistance settings.
  • 2ml or 4ml E-Liquid Capacity – Good option to choose for a Tank capacity for the Five 6 Mini Atomizer
  • Top Refilling – Easy and hassle-free e-liquid refilling system
  • Adjustable Bottom Airflow – Bottom airflow for a maximum flavor satisfaction and adjustable air holes to cater your vapor production needs.
Kangertech Spider Kit Review 510 Connector
Large and Ergonimic Firing Button and Centered 510 Connector
Kangertech Spider Kit Review Scroll Wheel
Scroll Wheel for Up/Down Wattage Adjustment

Design: Kangertech Spider Kit

The Five Six Mini Tank with a diameter of 26mm and a height of 44mm which is quite tall for an RTA, the main reason for this is I think to fit the 3 in 1 Coil inside and the included chips and LED lights at the bottom.

Giant Firing button design is present for a great vaping experience (More comfortable for a Thumb Press Firing). Overall exterior design is also comfortable in users hands, giving additional grip. I also like that they included a carbon fiber skin that the texture feels good.

Kangertech Spider Kit Review Colors
5 Color Combination Options

Performance of Kangertech Spider Kit

The Kangertech Spider Box Mod has a maximum of 200 watts of output that can provide a good performance. It can easily fire any Sub-Ohm resistance builds, especially that it has a 3 in 1 coil with different Sub-Ohm resistance. The different adjustable settings on Five 6 Mini Tank is great, switching to different coil resistance just like flipping a switch.

Kangertech Spider Kit Review Performance
Rocking the maximum power of 200 watts on a Red/Black Spider Kit

Kangertech Spider Kit VS Similar Kits

What are the key difference of Spider Kit with other similar mods?

  • Smok G-Priv 2 VS Kangertech Spider – Both Box Mods will provide you a good performance that can produce a great amount of vapor productions. The Kangertech Spider Kit will have an advantage with its innovative coil which has an option to switch instantly with different coil resistances.
  • Lost Vape Paranormal 166 VS Kangertech Spider – Kangertech Spider Box Mod will have an advantage in terms of maximum power output with up to 200 watts while Lostvape Paranormal 166 with only 166 watts of max power.

Final Thoughts on the Kangertech Spider Kit

The new feature of Kangertech Five 6 Mini Tank is very useful for beginners to intermediate users, especially for users who are not yet familiar in building a customize coils (customize resistance), you will not need to change your coils every now and then. With just an easy click, you are now able to change your resistance faster than ever.

This is what I am always talking about to what a good Vaping Device should have. An innovative technology/ feature to improve and enjoy our vaping experience, with a less hassle of tweaking the settings of our Box Mods and just enjoy blowing flavorful vapors.

Now It’s Available :Kanger Spider 200W Kit with Five 6 Mini Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

Lost Vape Orion Kit

 

Review of boxing fashion Tesla Nano 120W SteamPunk

Introduction

Teslacig is known for its quality devices that offer new technologies and an interesting appearance. Both of these qualities were successfully connected to the Tesla Nano 120W, also called Steampunk.

The main feature of fashion is the appearance. The manufacturer tried and made the case really remarkable. The second name of the device clearly indicates what Teslacig was inspired by – the steampunk style, which implies technologies based on a pair. Gears, steam clubs, abundance of copper and brass – in the appearance of the Tesla Nano 120W all this is clearly visible.

In addition to this, the mod stands out for its excellent characteristics. The device offers a customized preheating, called “taste control” in this model, memorization of steaming and tuning modes, and, of course, all modern functions like temperature control and varivatta.

Appearance

Describe the Tesla Nano 120W for a long time, but it’s much easier to look at it. Unlike analogues, the design of the Steampunk gear is not a print, but cut directly on the zinc alloy, from which the hull is made. This gives the Tesla Nano 120W a relief, so the mod does not slip in the hand and lies in the palm of your hand just fine.

At the choice of the manufacturer offers four colors: copper, brass, steel and dark steel (black). The dimensions of the mod are quite modest – 90 x 55 x 25 mm. For inconspicuous floating, the device does not fit, but it fits well in your hand. Against this backdrop, the name Nano looks a bit strange.

Separately, it is worth highlighting the location of the Fire button. It is on the “cut” between the top and “front”, where the screen is installed. Thanks to this, the button is equally conveniently pressed with both the index finger and the thumb.

Weighs 250 grams. The build quality is average – the buttons are rattling, the battery cover is dangling.

Functionality

The Tesla Nano 120W has a memory mode with three presets. A viper can at any time save the settings that have been set, so that they can be quickly restored from memory. This can be used to conveniently change atomizers or vaporize various types of liquids.

Varivatt

From 7 to 120 W in 0.5 W steps. In addition, the mod has a preheating function, which is closer to the “power curve” in devices from Vaporesso, for example, Tarot Nano. The dumper can choose as one of the three preheating modes (“normal”, “soft” and “strong”), and adjust the power for each sail of 10 seconds.

Temperature control (TC)

From 100 to 300 ° C or from 200 to 600 ° F in increments of 5 and 10 degrees, respectively. Temperature control is possible on nickel, titanium and stainless steel. It is also possible to adjust the temperature coefficient for the additional metal independently (TCR mode).

In the TC mode, you can adjust the power and block the resistance. The mod board works well – it does not “lie” and works exactly as it shows on the screen.

Sabom

The mod supports 0.1 to 3 ohms in the varivatt mode and from 0.05 to 1 ohm in the TC mode. Tesla Nano 120W is well suited for atomizers with a diameter of up to 25 mm, and large ones will already “hang” over the sides of the device.

Battery

Tesla Nano 120W runs on two 18650 batteries. The manufacturer recommends batteries with a current output of 30 A. There is no USB port, so you need to use a separate charger for charging.

Batteries are connected in series, so you can not soar on one battery. The manufacturer claims that silvered the contacts of the battery compartment, so the connection will be better, and the current is smoother. The battery compartment closes to a mechanical latch, and, as already mentioned, its implementation is far from ideal – the cases of failure have not yet been fixed, but the fastening looks very unreliable.

Display

The Tesla Nano 120W has a 0.91-inch OLED display, which contains all the necessary information: voltage, resistance, preheating mode, power, temperature, name of hover mode, battery charge, memory mode indicator.

Connector

The mod has a standard steel 510 connector with a spring-loaded pin.

AdvertisingScroll down to skip

Protection

The device has a full set of protectors:

  • from short circuit;
  • from overheating of the board;
  • from low / high resistance;
  • from redeployment;
  • from overheating of the evaporator (cut-off at the 10th second);
  • from improper installation of batteries;
  • Vent holes for the removal of gases from the batteries.

Control

Tesla Nano 120W is very easy to operate. To turn on and off, there is a separate mechanical lever that fits perfectly into the steampunk concept. The rest of the functions are activated through the menu mode – three times pressing Fire. In this mode, the steamer can select any line on the screen and interact with it. For example, look at the name of the mode and open a submenu with a choice of thermal control, TCR, varivatta and so on. Fire and “-” lock buttons.

Options

  • Dimensions of the fashion: 90 x 55 x 25 mm
  • Weight without batteries: 250 g
  • Weight with batteries: 340 g

Characteristics

  • Connector: 510 connector (spring-loaded steel pin)
  • Battery type: removable 18650 batteries (2 pcs.) With recoil current from 30 A
  • Supported resistance in TC mode: 0.05 – 1 Ohm
  • Supported resistance in the varivatt mode: 0.1 – 3 ohms
  • Operating power: 7 – 120 W
  • Adjustable temperature range: 200 – 600 ° F; 100 – 300 ° C
  • Maximum output voltage: 9 V
  • Maximum output current: 35 A

Equipment

The mod is delivered in this kit:

  • mod Tesla Nano 120W;
  • instruction;
  • proprietary packaging.

Feedback and experience

Fashion Tesla Nano 120W liked the steamers. They appreciated its appearance, technical characteristics and new functions. The function of direct adjustment of the board behavior during tightening looks interesting. A wiper can set 7 watts on the first second, 40 watts on the second, 20 watts on the third, and so on-no restrictions. And the device will fulfill these settings with perfect accuracy.

The quality of the coating in the fashion is good, it reliably protects the paint from erasure. The varnish keeps perfectly, but from winding the cliromiser on the top of the part, “scratches” quickly appear. When the lacquer coating comes off, the Tesla Nano 120W will be very difficult to clean – mud will be well clogged in the curly gears.

Disadvantage of the device is a careless assembly. The attendants say that the buttons are very loud, and the battery compartment cover is openly hanging. Batteries in the compartment it holds securely, but in the pocket the lid can open. Also, there are doubts about how long such an engineering element with a weak attachment will survive.

Very highly appreciated the location of the button Fire – it is convenient to press at any grip. And in general, the mod well rests in the hand due to the relief texture.

Tesla Nano 120W will appeal to those who love steampunk styling and want a comfortable and manageable and functional mod. In Russia, the device costs from 3000 to 6000 rubles, and if you consider the need to buy two batteries and a charger, then the purchase may be too expensive for a novice vaper.

 

Now It’s Available Here: Teslacig Nano 120W Kit

Hot Sale Recommendation:

Vaporesso Luxe 200W TC Kit With Skrr Tank

Voopoo Vmate 200W TC Box Mod

Voopoo Vmate 200W TC Kit With Uforce T1 Tank 

Hellvape Drop Dead RDA

VOOPOO Vmate 200W TC Box Mod

JUSTFOG MINIFIT Starter Kit 370mAh

Laan Lite Kit

VGOD Stig Lush ICE Kit

Vaporesso Revenger X With 5ml NRG Tank Kit

Vladdin Device RE Full Kit

JustFog Q16 Kit

Nano 120W by Teslacigs – almost a work of art

I always had a special attitude to Teslacigs products . At one time, one of my first serious boxes was a device from these guys. Since then, a lot of time has passed, for which a number of devices have passed through my hands, mainly mechanical boxes and atomizers. But that was not what interested me, but how Tesla’s boards work now. Thanks to the Gearbest store, I got a Nano 120W , which already became one of the most recognizable boxes in 2017 and my favorite. 

Packing :

The boxing mod came to me in an ordinary rectangular box made of cardboard. On the front side we see a schematic image of the box itself, the name and logo of the manufacturer. The reverse part of the box is maximally informative, on it we find short TTX boxes, equipment, warnings, certificates, etc. 
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

The device at the device is as simple as possible. Except for the box itself in the box you will find only a warranty card, a “business card” warning about which batteries can not be used, as well as the user’s instruction, including in Russian. 
Nano 120W by Teslacigs - almost a work of art
Design :

Running forward, I will immediately say that I liked the boxing fashion and already took an honorable place in my collection. The main reason for this is the appearance of the device. Designers checked the colossal work and did not spare the imagination, for which owners of boxing fashion would be grateful to them. 
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

As you may have noticed, the main idea of ​​boxing design is the Steampunk direction. Although I can not call myself a fan of all these gears, tumblers and other things, I still came to the fullest delight from what I saw. The whole body is covered with engraved elements, among which the name of the box itself and the manufacturer. In photographs this is not so noticeable, but I assure you that the engraving here is done as deeply and qualitatively as possible. Thanks to this, when using this box, I received an inexpressible tactile sensation.
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

On the quality of the assembly has something to say. The body is monolithic, so there are no problems with slots, backlashes and other things. The buttons also behave adequately, and sit tightly in their places. In short, even if you greatly shake boxing, there is absolutely no noise, unlike competitors, most of which can perfectly replace maracas. But the whole impression spoils at one time – if you want to open the battery compartment lid. Here engineers have made a serious mistake – the lid simply “teleports” in all directions, and the mechanism of fastening and loops does not inspire confidence. In general, the lid causes serious doubt about its longevity.
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

As for the sizes, here I have a little ambiguous feeling. On the one hand, the mod is much more compact than most of the offers on 2х18650, and just perfectly fits in the hand due to its shape (at least in my hand). On the other hand, despite the relative compactness, the box is quite heavy and causes some discomfort. Frankly, I did not care much about this question, because to resemble such a beauty powerfully a little and tormented. 
Nano 120W by Teslacigs - almost a work of art
Dimensions : 

Height – 88 mm. 
The width is 55 mm. 
Thickness – 25 mm. 
Weight – 240 g. 
Nano 120W by Teslacigs - almost a work of art
Specifications :

For me, it’s a little confusing for me to decide on the manufacturer’s decision to limit my box fashion to 120W. Maybe in this way they decided to emphasize that in this device the main design. I do not know, in my opinion, in our time such a restriction can become a serious drawback for many, even if they are very fond of fashion. Even more problem can be the lack of a micro usb connector, which will put an end to the capabilities of the board, not to mention the impossibility of charging the batteries. For me it did not become a special disadvantage, but you better consider this if you think about buying. 
Nano 120W by Teslacigs - almost a work of art
– adjustable power range – from 7 to 120W; 
– range of regulated voltage – from 0.5 to 9V; 
– Supported resistance – 0.1 to 3 ohm;
– a temperature limit of 200 to 600 degrees Fahrenheit (100 – 300 Celsius). 
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

To the operation of the board, I have absolutely no complaints. Everything works without the slightest failures, delays and other troubles. Separately it is worth mentioning the interface of the chip, I liked it for its simplicity and clarity. Three times a press on the fire button the board goes to the menu. The peculiarity is that there is no separate main menu here. You just flip through the items displayed on the display, select the desired one and go to the submenu. Of the chips can be called the ability to lock the buttons ±, fixing the resistance, preheating function and several modes of operation. By the way, power adjustment takes place in 0.5W increments, not 1W, as on most modern devices.

Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

Instead of pressing the fire button five times, the manufacturer proposed a full-fledged switch. And do you know what I’ll tell you? It is very cool! First, this detail perfectly complements the overall “Steampunk” design of the device. Secondly, it is really more convenient than the usual method. Thirdly, now that I just want to turn on or turn off my box, I do not look from the outside, like a person who plays the combattal battalion commander and constantly presses the same button.
Nano 120W by Teslacigs - almost a work of artNano 120W by Teslacigs - almost a work of art

The power supply for the board is a bundle of 2×2,650 batteries. Opening the cover we see two separate compartments with marks ± on the bottom. I already spoke about the cover of the compartment, but I repeat: it’s just disgusting. If everything is okay in the closed position, but you need to open the lid, how do you hope that this battery change will not be the last. The micro usb connector is not here, so you’ll have to get a separate charger. 

Nano 120W by Teslacigs - almost a work of art
Box fashion was not the most unequivocal. Along with the excellent appearance, we have quite controversial technical solutions, which probably can only be explained by the manufacturer himself. As you might have guessed, I liked boxing mod, so for some flaws I agreed to close my eyes. 

Now It’s Available On Our Web:Teslacig Nano 120W Kit

Hot Sale Recommendation:

Vaporesso Luxe Kit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Hellvape Drop Dead RDA

JustFog Minifit

Vladdin Device RE Full Kit

Laan Lite Kit

VGOD Stig Lush ICE Kit

Vaporesso Revenger X With 5ml NRG Tank Kit

JustFog Q16 Kit