Review of boxing fashion Tesla Nano 120W SteamPunk

Introduction

Teslacig is known for its quality devices that offer new technologies and an interesting appearance. Both of these qualities were successfully connected to the Tesla Nano 120W, also called Steampunk.

The main feature of fashion is the appearance. The manufacturer tried and made the case really remarkable. The second name of the device clearly indicates what Teslacig was inspired by – the steampunk style, which implies technologies based on a pair. Gears, steam clubs, abundance of copper and brass – in the appearance of the Tesla Nano 120W all this is clearly visible.

In addition to this, the mod stands out for its excellent characteristics. The device offers a customized preheating, called “taste control” in this model, memorization of steaming and tuning modes, and, of course, all modern functions like temperature control and varivatta.

Appearance

Describe the Tesla Nano 120W for a long time, but it’s much easier to look at it. Unlike analogues, the design of the Steampunk gear is not a print, but cut directly on the zinc alloy, from which the hull is made. This gives the Tesla Nano 120W a relief, so the mod does not slip in the hand and lies in the palm of your hand just fine.

At the choice of the manufacturer offers four colors: copper, brass, steel and dark steel (black). The dimensions of the mod are quite modest – 90 x 55 x 25 mm. For inconspicuous floating, the device does not fit, but it fits well in your hand. Against this backdrop, the name Nano looks a bit strange.

Separately, it is worth highlighting the location of the Fire button. It is on the “cut” between the top and “front”, where the screen is installed. Thanks to this, the button is equally conveniently pressed with both the index finger and the thumb.

Weighs 250 grams. The build quality is average – the buttons are rattling, the battery cover is dangling.

Functionality

The Tesla Nano 120W has a memory mode with three presets. A viper can at any time save the settings that have been set, so that they can be quickly restored from memory. This can be used to conveniently change atomizers or vaporize various types of liquids.

Varivatt

From 7 to 120 W in 0.5 W steps. In addition, the mod has a preheating function, which is closer to the “power curve” in devices from Vaporesso, for example, Tarot Nano. The dumper can choose as one of the three preheating modes (“normal”, “soft” and “strong”), and adjust the power for each sail of 10 seconds.

Temperature control (TC)

From 100 to 300 ° C or from 200 to 600 ° F in increments of 5 and 10 degrees, respectively. Temperature control is possible on nickel, titanium and stainless steel. It is also possible to adjust the temperature coefficient for the additional metal independently (TCR mode).

In the TC mode, you can adjust the power and block the resistance. The mod board works well – it does not “lie” and works exactly as it shows on the screen.

Sabom

The mod supports 0.1 to 3 ohms in the varivatt mode and from 0.05 to 1 ohm in the TC mode. Tesla Nano 120W is well suited for atomizers with a diameter of up to 25 mm, and large ones will already “hang” over the sides of the device.

Battery

Tesla Nano 120W runs on two 18650 batteries. The manufacturer recommends batteries with a current output of 30 A. There is no USB port, so you need to use a separate charger for charging.

Batteries are connected in series, so you can not soar on one battery. The manufacturer claims that silvered the contacts of the battery compartment, so the connection will be better, and the current is smoother. The battery compartment closes to a mechanical latch, and, as already mentioned, its implementation is far from ideal – the cases of failure have not yet been fixed, but the fastening looks very unreliable.

Display

The Tesla Nano 120W has a 0.91-inch OLED display, which contains all the necessary information: voltage, resistance, preheating mode, power, temperature, name of hover mode, battery charge, memory mode indicator.

Connector

The mod has a standard steel 510 connector with a spring-loaded pin.

AdvertisingScroll down to skip

Protection

The device has a full set of protectors:

  • from short circuit;
  • from overheating of the board;
  • from low / high resistance;
  • from redeployment;
  • from overheating of the evaporator (cut-off at the 10th second);
  • from improper installation of batteries;
  • Vent holes for the removal of gases from the batteries.

Control

Tesla Nano 120W is very easy to operate. To turn on and off, there is a separate mechanical lever that fits perfectly into the steampunk concept. The rest of the functions are activated through the menu mode – three times pressing Fire. In this mode, the steamer can select any line on the screen and interact with it. For example, look at the name of the mode and open a submenu with a choice of thermal control, TCR, varivatta and so on. Fire and “-” lock buttons.

Options

  • Dimensions of the fashion: 90 x 55 x 25 mm
  • Weight without batteries: 250 g
  • Weight with batteries: 340 g

Characteristics

  • Connector: 510 connector (spring-loaded steel pin)
  • Battery type: removable 18650 batteries (2 pcs.) With recoil current from 30 A
  • Supported resistance in TC mode: 0.05 – 1 Ohm
  • Supported resistance in the varivatt mode: 0.1 – 3 ohms
  • Operating power: 7 – 120 W
  • Adjustable temperature range: 200 – 600 ° F; 100 – 300 ° C
  • Maximum output voltage: 9 V
  • Maximum output current: 35 A

Equipment

The mod is delivered in this kit:

  • mod Tesla Nano 120W;
  • instruction;
  • proprietary packaging.

Feedback and experience

Fashion Tesla Nano 120W liked the steamers. They appreciated its appearance, technical characteristics and new functions. The function of direct adjustment of the board behavior during tightening looks interesting. A wiper can set 7 watts on the first second, 40 watts on the second, 20 watts on the third, and so on-no restrictions. And the device will fulfill these settings with perfect accuracy.

The quality of the coating in the fashion is good, it reliably protects the paint from erasure. The varnish keeps perfectly, but from winding the cliromiser on the top of the part, “scratches” quickly appear. When the lacquer coating comes off, the Tesla Nano 120W will be very difficult to clean – mud will be well clogged in the curly gears.

Disadvantage of the device is a careless assembly. The attendants say that the buttons are very loud, and the battery compartment cover is openly hanging. Batteries in the compartment it holds securely, but in the pocket the lid can open. Also, there are doubts about how long such an engineering element with a weak attachment will survive.

Very highly appreciated the location of the button Fire – it is convenient to press at any grip. And in general, the mod well rests in the hand due to the relief texture.

Tesla Nano 120W will appeal to those who love steampunk styling and want a comfortable and manageable and functional mod. In Russia, the device costs from 3000 to 6000 rubles, and if you consider the need to buy two batteries and a charger, then the purchase may be too expensive for a novice vaper.

 

Now It’s Available Here: Teslacig Nano 120W Kit

Hot Sale Recommendation:

Vaporesso Luxe 200W TC Kit With Skrr Tank

Voopoo Vmate 200W TC Box Mod

Voopoo Vmate 200W TC Kit With Uforce T1 Tank 

Hellvape Drop Dead RDA

VOOPOO Vmate 200W TC Box Mod

JUSTFOG MINIFIT Starter Kit 370mAh

Laan Lite Kit

VGOD Stig Lush ICE Kit

Vaporesso Revenger X With 5ml NRG Tank Kit

Vladdin Device RE Full Kit

JustFog Q16 Kit

Leave a Reply

Your email address will not be published. Required fields are marked *