FIRST IMPRESSION OUT OF THE BOX
What’s up everybody? Deucesjack at VapingInsider.com. I got a new one for you today. Today I got the Smok H Priv 2 Kit. let’s not waste anytime. Let’s cut down low. I’m going to go ever the tank, the mod, the menu system then we’re going tot come back on top. We’ll do cons and pros and we’re out of here. See you down low.
WHAT’S IN THE BOX
- 1 H-PRIV 2 225W Box Mod
- 1 SMOK TFV12 Big Baby Prince Tank
- 1 0.4ohm V8 Baby-Q4 Quadruple Coil
- 1 0.15ohm V8 Baby-T12 Duodecuple Coil
- 1 Spare Glass Tube
- 1 MicroUSB Cable
- Spare Parts & O-Rings
- Instructional Manual
Alright everyone, welcome to the downlow portion of this video. Today we’re going over the Smok H Priv 2 Kit. here is the packaging you will receive it in. There’s little barcode there for an App. on the back, they got a little bit of scratch and sniff over there. On the back here, you’ll see that the kit includes 1 H Priv 2 mod, a TFV12 Big Baby Prince tank. Boy that’s a mouthful. You also get 1.4 ohm quadruple coil preinstalled. You also get .15 ohm Duodecuple coil. I guess that’s how you say it. I’m not sure. Seems like a big name for a little coil. You got a replacement glass, USB cable, user manual and spare parts.
Let’s open this bad boy up and see what we have here. Here we go. Top of the box comes off likeso. Look at that. That is one beautiful mod. Let’s put it to the side for a second. Let’s put out the foam insert. Of course underneath the foam insert, we have all the books and crap. Battery safety card, file that to the side, user manual, file that to the side, some tasty silica gel, get rid of that, and we have a warranty card with a QC verification. Get rid of that.
One thing I’m a little surprised at, normally with Smok mod, I get a black cable, this one almost looks like a Vaporesso cable. Really nice high quality one. I like it. Good job on that, Smok.
We got some spare parts here. Here are some spare O rings, some spare gaskets, some more O rings, here is your spare glass. Tnk comes preinstalled with a bubble glass but this is a straight glass.
FROM TOP TO BOTTOM
Now, let’s take a look at the tank. This is the TFV12 Big Baby tank. I hope I said that right. I think so. Nice drip tip. Kind of got that snakeskin honeycomb thing going on. They did a nice job on the drip tip. Typical Smok drip tip. 2 O rings on the side like that. It’s an 810 style drip tip. But you need the ones with the o rings on the outside not the ones where your o rings are on the inside. Nice deep juice cup there. Locking mechanism on top. Slider style, slide it open. There is your fill port right there. You get an extra gasket with it. I really like that locking mechanism right there. Clear markings as to where you open it there. You see the ‘Open’ right there. I don’t know if you could see that on camera because it’s dark.
On the bottom, we have bottom airflow. Nice smooth AFC tolerance. Stoppers on both sides, whatever you adjust on one side happens on the other. On the bottom of the tank we have some Smok branding. 510 pin, insulator ring around it. Looks like a stainless steel 510 pin, stainless steel threading around the edges. Very smooth, it sat on all my other tanks flush.
If you want to take it apart, you simply give the base a twist and you’ll see the coil comes out with the base. This is the .15 ohm coil, good for 50 to 90 watts. Best rating of 60 to 80. Nice big coil. Plenty of wire in there, plenty of cotton. Threading on the coil is very smooth. I had it in there pretty tight. There is the base right there. Smok always does a good job on their tanks. I know they get a lot of hate but they do do a good job on it. I apologize for using a juice up coil in this demonstration but when I first got this, I thought I was going to be doing a written review.
A you can see, this is the .4 ohm coil, good from 30 to 65 watts. Best from 50 to 60 watts and that’s just one coil in the middle there. Definitely a mellower vape than the other coil that I just showed you. Let’s put this all back together.
Drip tip in, let’s zoom out a little bit and let’s put it on the mod and let’s see what we have here. First thing you’re going to notice is, this has got like an anodized type of finish to it. It is an absolute fingerprint magnet but I really like the honeycomb that they did over here. I think it matches the drip tip well. You got some carbon fiber panels on the side here. Has a real anodized like look to it. More carbon fiber over here. A little bit of Smok branding. A little bit of H Priv 2 branding over here. This is your fire bar. Very very clicky. You can fire it down really low and it’ll still fire. Here is your USB update port. On the top is where your screen is. Before we install some batteries and get into the screen, let’s go over the 510 connections.
Spring loaded gold plated 510 connection. Has what I would call a medium throw with a medium spring. Threading around here is very nice. All my atomizers sit flush on it. Stainless steel plate over here. Going around to the other side of the mod, here is your battery door. You kind of have to slide it out and push it up. It is not spring loaded. You have clear battery indicator markings over here although I wish they were a different color. Gold plated button style contacts that label the batteries A and B. Inside, you can see, there’s also clear battery orientation markings. That gold piece down there is a spring loaded gold plated battery contact. We’re going to load some batteries in. positive side down, over here. Negative side down, over here. Shut it like that. You’ll se w have some venting over here as well. A little design by Smok over here, or Smoke, whatever you want to call it.
Batteries are installed. All you do, 1 2 3 4 5, 5 clicks on, you see the Smok screen. You see the version of the firmware. Here you see, I’m at 58 watts, normal preheat, there are my battery meters, resistance, voltage and that is my puff counter in seconds.
Now, in order to enter the menu system, 1 2 3, right now you’re in the mode. You can hold that down and now you can scroll with your left and right buttons between the different modes. You got Wattage, Titanium, Nickel 200, Stainless Steel and back to Wattage mode.
Let’s put it into Stainless Steel for now, hard press that. Once you pick your temperature, you can adjust your wattage in TC mode. Hard press to confirm. You can also adjust your TCR, hard press to confirm and now you can see we are in temperature control mode because there’s a little SS in the corner there.
You want to go back into Wattage mode, 1 2 3. Now you can scroll and go back to Wattage mode. Now, when you go to Wattage mode, it access you if you want Normal, Hard or Soft. I normally stay at Normal, hard press and that’s it. You’re in Wattage mode.
In order to access the other functions of this screen, 1 2 3, now you can adjust your puffs, hard press. You can do that. Hard press, reset puffs, No, Yes. now we reset the Puffs. 1 2 3, you can also go into your settings mode, hard press. You can go into Stealth. You can adjust the screen brightness, you can rotate the screen there and you can adjust your ohms there. And that’s your download menu and back to Stealth. We just hard press. Hard press, we’re out. 1 2 3, settings and this is where you can power it off. Hard press, hit one of the buttons, now you can power it off. Now it says goodbye. Now in order to turn it back on, of course again, 5 clicks. And now, if you want to lock the mod, you can give it 5 clicks and now the mod is locked. There you go.
That’s all I have for you folks on the down low. Let’s cut back on top. Let’s vape on it and then we’ll talk about the cons and pros of the Smok H Priv 2 Kit. See back on top.
Alright. We’re back on top with the Smok H Priv 2 Kit. Man, you saw it down low. One gorgeous looking kit. They did a great job matching the tank to the mod. Looks fantastic. I’m really digging it. I’ve been rocking this thing for well over a month now. It’s held up really nice and you guys know that I’m real rough on my mods. Let’s not waste any more time. Let’s cut right into the cons and the pros.
First con is going to be that screen, man. That screen is super dim. Smok, what are you doing? Get rid of that dark screen cover. Bad job. It’s useless outside in direct sunlight, I don’t like it.
Next con is going to be, no material on the coils. Smok, you gotta stop with that. We need to know what we’re vaping. You need to imprint the material on the coils.
Other con is going to be, you guys got a decent TC device. It’s been doing ok TC, why didn’t you include a TC coil? Start using stainless steel coils, Smok. we’d like to see that.
Other con is going to be, it only charges at 1 amp. Yes, we recommend you charge externally all the time but for those times that you were in a pinch, we love having 2 amp charging. It’s standard. Smok, you need to make that standard on all your mods, 2 amp charging.
Let’s get in to the pros because there are a lot of them.
First pro is going to be the tank. That bubble glass 7 ml capacity. They’ll get a pro for that.
Second pro is going to be, the TC on this is actually decent. It’s better than past Smok mods. We’ll give them a pro for that.
Going to give them a pro for accuracy in power mode. I vape it next to my DNA and Yihi Chip and it seems to be hitting all the wattages. It seems to hit the full amount of wattage on this mod. I’m going to give them a pro on that.
Let’s give them a pro on nice flavor and cloud production. They’ll get a pro for that.
Paint quality. I’m going to give them a pro for that. Paint quality on this thing, this anodized look, simply awesome. Great job on that Smok.
I’m going to give them a pro on the looks. Look at this thing, man. It’s a good looking kit. There’s no doubt about it. It’s a looker.
Let’s give them a pro on the form factor. It’s got a very comfortable form factor and very easy to fire. Love that firing bar. We’ll give them a pro on the firing bar as well and the fact that it’s comfortable to fire.
Let’s give them a pro on firmware upgradeable. That always gets a pro on this channel.
The last pro I’m going to give them is, they did a great job on the battery door. It’s nice and tight. It doesn’t snap open when I put it down. Great job on that, Smok.
Focus On www.ave40.com For More Latest Vape News.
Now It’s Available :SMOK X-Priv 225W TC Kit with TFV12 Prince
Hot Sale Recommendation: